Product Parameters

The side of the camera marked with a yellow graphic label is the high-definition camera, and the other side is the infrared camera.

Overall power consumption: Approximately 24W; Weight: Approximately 30kg

Operating temperature: 25℃ to 60℃

Operating voltage of single pan-tilt (excluding camera): 12V

Operating current of single pan-tilt (excluding camera): 1A

Maximum current of single pan-tilt (excluding camera): 1.6A

Overall operating current of the device: 2A

Maximum rotation angle of the device: 360° horizontally / 180° vertically

Device protection level: IP68; Explosion-proof grade: ExdIICT6/DIP A20 TA, T6

Supported video output: ONVIF/HTTP/RTSP video output

Technical Specifications

Noise Equivalent Temperature Difference (NETD): ≤ 50mK

Operating temperature: -40℃ to 60℃

Thermal imaging focal length: Optional 8mm / 35mm

Focusing method: Fixed focus

Detector type: Uncooled focal plane microbolometer

Thermal imaging detector resolution: Optional 384×288 / 640×480

Pixel pitch: ≤ 17μm; Response wavelength band: 7μm - 14μm

Thermal imaging pseudo-color modes: No less than 7 optional modes including black-hot, white-hot, iron-red, rainbow, etc.

Video output: Digital video

The device supports infrared monitoring output via Gigabit Ethernet and dynamic temperature measurement function

The core adopts NBT (No Blind View) patented technology, with a non-shutter structure to realize continuous and uninterrupted screen monitoring

The core adopts TIE (Digital Image Detail Enhancement) patented technology, making the screen more delicate and clear

Supports custom boot logo screen

Full-screen custom OSD (On-Screen Display) overlay function

Overvoltage, undervoltage protection function and reverse connection protection function

Built-in fire hazard temperature measurement and early warning module function

Supports thermal imaging video functions including area intrusion detection, entry area detection and exit area detection

Thermal imaging video images support temperature measurement rules for points, lines and areas

Supports isotherm function and abnormal temperature alarm function; an alarm can be triggered when the temperature in the thermal imaging detection area exceeds the preset temperature

Supports automatic protection function of the infrared thermal imager, with strong light detection and infrared sensor shielding functions

Key Technical Term Explanations

NETD (Noise Equivalent Temperature Difference): A core indicator reflecting the thermal sensitivity of the thermal imager. A value of ≤50mK means the device can distinguish extremely small temperature differences, ensuring clear imaging even for low-temperature-difference targets.

IP68 Protection Level: The highest level in the IP protection standard. "6" means complete protection against dust intrusion; "8" means the device can be continuously submerged in water (specific depth and time depend on the manufacturer’s specification) without water damage.

ExdIICT6/DIP A20 TA, T6 Explosion-Proof Grade:

"ExdIIC" indicates it is suitable for explosive environments containing IIA, IIB, IIC class combustible gases;

"T6" means the maximum surface temperature of the device does not exceed 85℃, applicable to high-temperature-risk environments;

"DIP A20" means it is suitable for dust explosive environments, with protection against dust accumulation and ignition.

NBT (No Blind View) Technology: Eliminates the traditional shutter structure that causes temporary screen blackout during calibration, ensuring 24/7 continuous monitoring—critical for scenarios requiring non-interrupted security (e.g., substation, industrial workshops).