Product Parameters

The side of the camera unit marked with a yellow graphic label below is the high-definition camera, while the other side is the infrared camera.

Overall power consumption: Approximately 25W; Weight: Approximately 8.35kg

Operating temperature: -25℃ to 60℃

Operating voltage of single pan-tilt (excluding camera): 12V

Operating current of single pan-tilt (excluding camera): 1A

Maximum current of single pan-tilt (excluding camera): 1.6A

Overall operating current of the device: 2.08A

Maximum rotation angle of the device: 360° horizontally / 180° vertically

Device protection level: IP66

Supported video output: ONVIF/HTTP/RTSP video output

Technical Specifications

Noise Equivalent Temperature Difference (NETD): ≤ 50mK

Operating temperature: -40℃ to 60℃

Thermal imaging focal length: Optional 8mm / 35mm

Focusing method: Fixed focus

Detector type: Uncooled focal plane microbolometer

Thermal imaging detector resolution: 384×288

Pixel pitch: ≤ 17μm; Response wavelength band: 7μm - 14μm

Thermal imaging pseudo-color modes: No less than 7 optional modes, including black-hot, white-hot, iron-red, rainbow, etc.

Video output: Digital video

The device supports infrared monitoring output via Gigabit Ethernet and dynamic temperature measurement function

The core adopts NBT (No Blind View) patented technology, with a non-shutter structure to realize continuous and uninterrupted screen monitoring

The core adopts TIE (Digital Image Detail Enhancement) patented technology, making the image more delicate and clear

Supports custom boot logo screen

Full-screen custom OSD (On-Screen Display) overlay function

Equipped with overvoltage, undervoltage protection functions and reverse connection protection function

Built-in fire hazard temperature measurement and early warning module function

Supports thermal imaging video functions including area intrusion detection, entry zone detection, and exit zone detection

Thermal imaging video images support temperature measurement rules for points, lines, and areas

Supports isotherm function and abnormal temperature alarm function; an alarm will be triggered when the temperature in the thermal imaging detection area exceeds the preset temperature

Supports automatic protection function of the infrared thermal imager, with strong light detection and infrared sensor shielding functions

Key Term Interpretation

NETD (Noise Equivalent Temperature Difference): A critical indicator of thermal imager sensitivity. A value of ≤50mK means the device can identify extremely small temperature variations, ensuring clear imaging even for targets with minimal temperature differences (essential for early fault detection in equipment like substations).

IP66 Protection Level: A high-level protection standard in the IP system. The first digit "6" indicates complete protection against dust ingress (no dust can enter the device), and the second digit "6" means it can withstand powerful water jets from any direction without internal damage, suitable for outdoor harsh environments.

NBT (No Blind View) Technology: Eliminates the traditional shutter mechanism that causes temporary screen blackouts during device calibration. This ensures 24/7 uninterrupted monitoring, which is crucial for scenarios requiring continuous surveillance (e.g., industrial sites, power facilities).

TIE (Digital Image Detail Enhancement) Technology: A digital image processing technique that enhances subtle details in thermal images (such as edge contours of equipment and temperature gradient changes). It makes the image texture clearer, helping operators accurately judge the status of monitored targets.